Plane  
Gallery: Hack.Net Gallery navigate up Album: Plane navigate up
First Photo Previous Photo 40 of 709 Next Photo Last Photo
Jump to:
Driver arm at center bearing support clecoed in position- holes done first on drill press

Driver arm at center bearing support clecoed in position- holes done first on drill press

Description : It would be extremely difficult to drill the steel arms in place on the Al tube an get the right pattern, so these were drilled ahead of time on a drill press. It was a pain sanding the paint out of the arms.

First Photo Previous Photo 40 of 709 Next Photo Last Photo
Jump to:
Gallery: Hack.Net Gallery navigate up Album: Plane navigate up
Powered by Gallery v1 RSS